Before driving

Fastening or unfastening the seat belt

~1min read
Fig. 45

Insert the seat belt latch plate
into the buckle.

Fig. 46

Release the latch plate from the buckle.


Read and observe the introductory information
and safety warnings first
⇒Introduction
to the topic

Correctly fastened seat belts keep the occupants in the correct position during braking or in an accident, so that they can provide maximum protection ⇒ .


Fastening the seat belt

Fasten the seat belt before every journey.

  • Adjust the front seat and head restraint correctly ⇒ Adjusting the seating position .
  • Lock the rear seat backrest in the upright position ⇒ .
  • Pull the belt webbing evenly over the chest and pelvis from the latch plate. Do not twist the belt webbing ⇒ .
  • Firmly insert the latch plate into the buckle belonging to the seat position ⇒ Fig. 45 .
  • Perform a pull test on the seat belt to check that the latch plate is securely locked in the buckle.
Unfastening the seat belt

Only unfasten the seat belt when the vehicle is stationary ⇒ .


  • Press the red button on the buckle ⇒ Fig. 46 . The latch plate ejects.
  • Guide the belt back by hand so that the belt webbing retracts more easily, the seat belt does not twist and the trim is not damaged.
Warning
Incorrect belt routing can cause serious or fatal injuries in the event of an accident.
  • The seat belts only provide optimal protection when the backrest is in an upright position and the seat belt is correctly fitted to the occupant's body size.
  • Unfastening the seat belt while driving can cause serious or fatal injuries in an accident or during braking!