Before driving

Warning lamp

~2min read
Fig. 38

Warning lamp in the instrument cluster display.


Fig. 39

Seat belt status indicator for the rear seats in the instrument cluster display.

Read and observe the introductory information
and safety warnings first
⇒Introduction
to the topic


lights up or flashes Possible cause Remedy
Driver's seat belt not fastened. Fasten seat belts.
Front passenger's seat belt not fastened, if the front passenger seat is occupied.
Objects are lying on the front passenger seat. Remove objects from the front passenger seat and stow them securely.
Seat belt of a rear seat passenger not fastened. Fasten seat belt.
Seat belt of a rear seat passenger fastened.

When the ignition is switched on, some warning and indicator lamps light up briefly to check their function. They go out after a few seconds.

If the seat belts are not fastened when the journey begins and the vehicle speed exceeds approximately 25 km/h, or if a seat belt is unfastened while driving, an audible signal sounds for a few seconds. In addition, the warning lamp flashes⇒ Fig. 38 .


The warning lamponly goes out when the driver and front passenger have fastened their seat belts with the ignition switched on.

Seat belt status display for the rear seats

When the ignition is switched on, the seat belt status indicator ⇒ Fig. 39 shows the driver in the instrument cluster display whether any passengers in the rear seats have fastened their seat belts. The symbolindicates that the passenger in this seat has fastened their seat belt. The symbolindicates that the seat belt is not fastened.

When a seat belt is fastened or unfastened in the rear seats, the seat belt status is displayed for approximately 30 seconds. The display can be hidden by pressing the button
in the instrument cluster display.

If a seat belt is unfastened in the rear seats while driving, the seat belt status indicator flashes for up to 30 seconds. At a speed above approximately 25 km/h, an audible signal also sounds.

Warning
Seat belts that are not fastened or are fastened incorrectly increase the risk of serious or fatal injury. The optimal protective effect of the seat belts is achieved only when the seat belts are fastened and used correctly.