Symbol explanations
Sanding
Avoid sanding through
- It is recommended to carefully sand the marked areas by hand to avoid sanding through the KTL e-coat primer.

Seam sealing
Sealing
- Apply sealant.

Fine seam sealing
- For fine seam sealing, the sealant must project at least 3 mm and have a height of 0.5 mm.

Coarse seam sealing
- For coarse seam sealing, the sealant must project a total of 8 mm and have a height of 2 mm.

Smoothing the sealant
- After applying the sealant, smooth these marked areas.
![]()
Note
When smoothing the sealed seam, make sure the protected sheet metal edges are not exposed. A sufficiently thick PVC layer must cover the sheet metal.

Spreading the sealant
- After applying the sealant, spread these marked areas.
![]()
Note
When spreading the sealed seam, make sure the protected sheet metal edges are not exposed and that a sufficiently thick PVC layer covers the sheet metal.

Sealing hem flange
- After applying the sealant to a hem flange, close these marked areas.
![]()
Note
When spreading the sealed seam, make sure the protected sheet metal edges are not exposed. A sufficiently thick PVC layer must cover the sheet metal so that the hem flange remains closed.

Cavity preservation
Preserve cavities
- After body repair, these marked areas must be preserved.
