Cleaning the air filter element

NOTE:

There is a check hose "1" at the bottom of the air filter case. If dust and/or water collects in this hose, clean the air filter element and air filter case.

1. Remove:

• Rider seat Refer to "GENERAL CHASSIS" on page 4-1.

2. Remove:

• Fuel tank Refer to "FUEL TANK" on page 7-1.

3. Remove:

• Air filter case cover "1"
• Air filter element

4. Clean:

• Air filter element "1" Apply compressed air to the outer surface of the air filter element.

5. Check:

• Air filter element Damage Replace.

6. Install:

• Air filter element
• Air filter case cover (along with the gaskets)

Never operate the engine without the air filter element installed. Unfiltered air will cause rapid wear of engine parts and may damage the engine. Operating the engine without the air filter element will also affect throttle body tuning, leading to poor engine performance and possible overheating.

NOTE:

Make sure the air filter element is properly installed in the air filter case.

7. Install:

• Fuel tank Refer to "FUEL TANK" on page 7-1.
• Rider seat Refer to "GENERAL CHASSIS" on page 4-1.