Adjusting the engine idling speed

NOTE:

Prior to adjusting the engine idling speed, the air filter element should be clean, and the engine should have adequate compression.

1. Start the engine and let it warm up for several minutes.

2. Remove:

• Rider seat Refer to "GENERAL CHASSIS" on page 4-1.

3. Lift the fuel tank. (Do not disconnect the fuel hose, fuel drain hose, and couplers.) Refer to "FUEL TANK" on page 7-1.

4. Install:

• Digital tachometer (onto the spark plug lead)

5. Check:

Engine idling speed Out of specification → Adjust.

6. Remove:

• Right side panel Refer to "GENERAL CHASSIS" on page 4-1.

7. Adjust:

• Engine idling speed

a. Turn the pilot screw "1" in direction "a" or "b" until the specified engine idling speed is obtained.

8. Remove:

• Digital tachometer

9. Install:

• Fuel tank Refer to "FUEL TANK" on page 7-1.
• Right side panel
• Rider seat Refer to "GENERAL CHASSIS" on page 4-1.

10.Adjust:

• Throttle cable free play Refer to "ADJUSTING THE THROTTLE CABLE FREE PLAY" on page 3-6.