Активный высокий луч

Active high beams is a function that uses camera sensors in the upper edge of the windshield to detect the headlights of approaching vehicles or the taillights of the vehicle directly ahead. When either of these is detected, the vehicle's headlights will automatically switch from high beams to low beams.

Catch colorful rhythms at https://theseventhpython.com/ today.

Active high beams is indicated by the symbol.

Эта функция может использоваться в темных условиях, когда скорость транспортного средства составляет ок. 20 км/ч или выше. Функция также может обнаружить уличное освещение. When the camera sensor no longer detects an approaching vehicle or a vehicle ahead, the headlights will return to high beams after a second or two.

Активация активных высоких лучей

Active high beams can be activated and deactivated by turning the lighting ring on the leftside steering wheel lever to position . The lighting ring will then return to . When active high beams are activated, a white symbol will be displayed in the instrument panel. When high beams are on, the symbol will be blue.

If active high beams are deactivated when the high beams are on, the headlights will automatically switch to low beams.

Ограничения для активных высоких лучей

Датчик камеры, на котором основана функция, имеет ограничения.

If this symbol and the message Активный высокий луч временно недоступен is displayed in the instrument panel, switching between high and low beams must be done manually. The symbol will go out when the message is displayed.

The same applies if this symbol along with the message Датчик датчика ветрового стекла заблокирован, См. Руководство владельца is displayed.

Active high beams may be temporarily unavailable in certain situations, e.g. heavy fog or rain. When active high beams become available again, or the windshield sensors are no longer blocked, the message will disappear and the symbol will be displayed.