Audi A3 Quiz
Manual transmission

Shift Linkage

In this manual: Manual transmission
Owner's Manual — 42Routine Care and Maintenance — 32Engine — 22Engine Cooling System — 9Ventilation, Heating and Air Conditioning Systems — 11Fuel System — 9Fuel Injection System — 4Diesel engine injection system — 5Exhaust System — 9Electronic Ignition and Fuel Injection Control System — 6Charging and Starting Systems — 12Manual transmission — 12Clutch and Drive Shafts — 6Brake System — 13Front Suspension — 5Rear Suspension — 6Steering — 7Body — 70Body Electrical Equipment — 37Wiring Diagrams — 35
~1min read

переключения передач. Двигатели 1.6 л А – тяги переключения В – тяга выбораShift Rod Drive. Engines 1.6 L A – shift rods B – gear selector rod Arrow A gear shift Arrow B gear selector movement

переключения передач. Двигатели 1.8 л А – тяги переключения В – тяга выбораShift Cable Drive. Engines 1.8 L A – shift rods B – gear selector rod C – exhaust system heat shield Remove before removing the shift drive 1 – shift lever 2 – guide lever with catch/cable Arrow A gear shift Arrow B gear selector movement

When engaging a gear, distinguish between the lateral movement (gear selection) of the shift lever to the neutral position and the actual gear shift. On vehicles with 1.6 L engines, both movements are transmitted to the transmission through rods.

On models with 1.8 L engines, two cables are used instead of rods to transmit shift lever movements. After removing the transmission or disassembling the shift drive, it must be adjusted again.

CAUTION

Lubricate all bearings and friction surfaces with AUDI G 052 142 A grease.

2. Lubricate all bearings and friction surfaces with AUDI G 052 142 A2 grease.

Test yourself

A quick Audi A3 quiz: every answer comes with an explanation and a link to the manual page.