Electrical System

Bulb Holder, Removing and Installing

~2min read

Bulb Socket, Removing and Installing, Tail Lamp, Sedan

Removing

- Remove the outer tail lamp. Refer to → Chapter "Tail Lamp, Removing and Installing, Sedan".

- Push the locking bracket in direction of -arrow- and remove the bulb socket -1- from the housing.

- Remove the bulb from the bulb socket.

Installing

Install in reverse order of removal. Note the following:

- Insert the new bulb in the socket. Do not touch the glass bulbs with bare hands.

A94-11228

Bulb Socket, Removing and Installing, LED Tail Lamp, Sedan

Removing

- Remove the outer tail lamp. Refer to → Chapter "Tail Lamp, Removing and Installing, Sedan".

- Turn the socket -1- counterclockwise -arrow- and remove it from the housing.

- Remove the bulb from the bulb socket.

Installing

Install in reverse order of removal. Note the following:

- Insert new bulbs in the bulb socket. Do not touch the glass bulbs with bare hands.

A94-11122

Bulb Socket, Removing and Installing, Avant

Removing

- Remove the outer tail lamp. Refer to → Chapter "Tail Lamp, Removing and Installing, Avant".

- Remove the bolts -arrows-.

- Remove the bulb socket -1- from the housing.

- Remove the bulb from the bulb socket.

Installing

Install in reverse order of removal. Note the following:

- Insert the new bulb in the socket. Do not touch the glass bulbs with bare hands.

A94-11565

Bulb Socket, Removing and Installing, Rear Lid Tail Lamp, Sedan

Removing

- Remove the inner tail lamp. Refer to → Chapter "Rear Lid Tail Lamp, Removing and Installing, Sedan".

- Push the locking bracket -1 and 3- in direction of -arrow- and remove the bulb socket -2- from the housing.

- Remove the tail lamp bulb/fog lamp from the bulb socket.

- Remove the back-up lamp bulb from the bulb socket.

Installing

Install in reverse order of removal. Note the following:

- Insert new bulbs in the bulb socket. Do not touch the glass bulbs with bare hands.

A94-11147

Inner Bulb Socket, Removing and Installing, Rear Lid Tail Lamp, Avant

Removing

- Remove the inner tail lamp. Refer to → Chapter "Rear Lid Tail Lamps, Removing and Installing, Avant".

- Remove the bulb socket -1- from the housing -2- by pulling the clip -arrows- over the threaded pin -3-.

- Remove the tail lamp bulb/fog lamp from the bulb socket.

- Remove the back-up lamp bulb from the bulb socket.

Installing

Install in reverse order of removal. Note the following:

- Insert new bulbs in the bulb socket. Do not touch the glass bulbs with bare hands.

A94-11563