Electrical System

Tail Lamp, Removing and Installing

~1min read

Tail Lamp, Removing and Installing, Sedan

- Turn the light switch to position "0".

- Remove the cover -2- from the tail lamp assembly in direction of -arrow A-.

- Remove the bolts -3- and -4-.

- Swivel the tail lamp assembly -1- toward the outside in direction of -arrow B- and loosen the bolt from the clip nut.

- Disconnect the connector.

A94-11127

Installing

Install in reverse order of removal. Note the following:

- Position the tail lamp -4- assembly on the body and push the bolt into the clip nut.

- Insert the centering pins -2 and 3- and tabs on the cover -1- into the mount and into the tail lamp assembly -arrows-.

- Push the cover onto the tail lamp assembly.

  • The tabs must audibly engage in the tail lamp assembly.
A94-11121

Tail Lamp, Removing and Installing, Avant

Removing

- Turn the light switch to position "0".

- Remove the cover -2- from the tail lamp assembly in direction of -arrow A-.

- Remove the bolts -3- and -4-.

- Swivel the tail lamp assembly -1- toward the outside in direction of -arrow B- and loosen the bolt from the clip nut.

- Disconnect the connector.

A94-11257

Installing

Install in reverse order of removal. Note the following:

- Position the tail lamp -1- on the body and push the bolt into the clip nut.

- Insert the centering pins -3 and 4- and tabs on the cover -2- into the mount and into the tail lamp assembly -arrows-.

- Push the cover onto the tail lamp assembly.

  • The tabs must audibly engage in the tail lamp assembly.
A94-11232