Body

Overview - Instrument Panel

~8min read
0102030405032N·mlb·ft
Tightening torque found on this page

Overview - Instrument Panel

Overview - Instrument Panel

1 - Bolt

  • 3 N·m

2 - Instrument Panel

WARNING

  • Follow all Safety Precautions when working with pyrotechnic components. Refer to → Chapter "Pyrotechnic Components Safety Precautions".
  • Follow the allocation of the airbag to the instrument panel. Refer to the Parts Catalog.
  • Removing and installing. Refer to → Chapter "Instrument Panel, Removing and Installing".

3 - Bolt

  • 3 N·m

4 - Bolt

  • 1,5 N·m
  • Quantity: 12

5 - Defroster Vent in the Center

  • Removing and installing. Refer to → Chapter "Front Center Defroster Vent, Removing and Installing".

6 - Bolt

  • 1,5 N·m
  • Quantity: 2

7 - Bolt

  • 1,5 N·m

8 - Sunlight Photo Sensor -G107-

  • Removing and installing. Refer to → Heating, Ventilation and Air Conditioning; Rep. Gr.87; Additional Components for Control and Regulation; Sunlight Photo Sensor G107, Removing and Installing.

9 - Center Speaker -R208-

  • Equipment levels
  • Removing and installing. Refer to → Communication; Rep. Gr.91; Sound System; Center Speaker, Removing and Installing.

10 - Bolt

  • Tightening specification. Refer to → Communication; Rep. Gr.91; Sound System; Component Location Overview - Sound System.

11 - Center Speaker Trim

  • Removing and installing. Refer to → Chapter "Center Speaker Trim, Removing and Installing".
  • First, insert in the front of the instrument panel and press on it until it engages audibly.

12 - Center Speaker 2 -R219-

  • Equipment levels
  • Removing and installing. Refer to → Communication; Rep. Gr.91; Sound System; Center Speaker, Removing and Installing.

13 - Side Speaker Trim

  • Quantity: 2
  • Removing and installing. Refer to → Chapter "Side Speaker Trim, Removing and Installing".
  • First, insert in the front of the instrument panel and press on it until it engages audibly.

14 - Bolt

  • Tightening specification. Refer to → Communication; Rep. Gr.91; Sound System; Component Location Overview - Sound System.

15 - Left Front Treble Speaker -R20-

  • Right: Right Front Treble Speaker -R22-
  • Equipment levels
  • Removing and installing. Refer to → Communication; Rep. Gr.91; Sound System; Front Treble Speakers, Removing and Installing.

16 - Upper Instrument Panel Cover

  • Removing and installing. Refer to → Chapter "Instrument Panel Upper Cover, Removing and Installing".

17 - Bolt

  • 1,5 N·m
  • Quantity: 2

18 - Trim Strip

  • For the instrument panel cover
  • Removing and installing. Refer to → Chapter "Instrument Panel Upper Cover, Removing and Installing".

19 - Bolt

  • 3 N·m

20 - Side Defroster Vent

  • Removing and installing. Refer to → Chapter "Side Defroster Vent, Removing and Installing".
  • Press on it until it locks

21 - Bolt

  • 3 N·m

22 - Screws

  • 3 N·m

23 - Side Cover

  • For the instrument panel
  • Removing and installing. Refer to → Chapter "Instrument Panel Side Cover, Removing and Installing".
  • Press on until it engages audibly

24 - Front Passenger Airbag

  • With the Front Passenger Airbag Igniter 1 -N131- and Front Passenger Airbag Release Valve Igniter -N491-
  • Market-specific with Front Passenger Airbag Igniter 2 -N132-

WARNING

  • Follow all Safety Precautions when working with pyrotechnic components. Refer to → Chapter "Pyrotechnic Components Safety Precautions".
  • Follow the allocation of the airbag to the instrument panel. Refer to the Parts Catalog.
  • Overview. Refer to → Chapter "Overview - Front Passenger Airbag".
  • Locking and activating possible with key switch

25 - Nut

  • Tightening specification. Refer to → Chapter "Overview - Front Passenger Airbag".

26 - Screws

  • 3 N·m

27 - Screws

  • 3 N·m

Overview - Instrument Panel, Installation Components

Overview - Instrument Panel, Installation Components

1 - Driver Side Trim

  • For the instrument panel
  • Clipped in to the instrument panel
  • Removing and installing. Refer to → Chapter "Instrument Panel Decorative Trim, Removing and Installing, Driver Side".

2 - Frame

  • For the instrument cluster
  • Removing and installing. Refer to → Chapter "Instrument Cluster Frame, Removing and Installing".

3 - Bolt

  • 3 N·m
  • Quantity: 4

4 - Bolt

  • 3 N·m

5 - Instrument Panel Vent

  • For driver side
  • Removing and installing. Refer to → Chapter "Driver Side Instrument Panel Vent, Removing and Installing".
  • Replace damaged or deformed clips
  • When sliding it into the installation opening, make sure the air duct engages correctly.
  • Press it into the installation opening as far as the stop.

6 - Instrument Cluster

  • Removing and installing. Refer to → Electrical Equipment; Rep. Gr.90; Instrument Cluster; Overview - Instrument Cluster.

7 - Instrument Panel Cover

  • Removing and installing. Refer to → Chapter "Instrument Panel Rear Cover, Removing and Installing".
  • Replace damaged or deformed clips
  • Press on until it engages audibly

8 - Instrument Panel

WARNING

  • Follow all Safety Precautions when working with pyrotechnic components. Refer to → Chapter "Pyrotechnic Components Safety Precautions".
  • Follow the allocation of the airbag to the instrument panel. Refer to the Parts Catalog.
  • Removing and installing. Refer to → Chapter "Instrument Panel, Removing and Installing".

9 - Instrument Panel Cover

  • Removing and installing. Refer to → Chapter "Instrument Panel Rear Cover, Removing and Installing".
  • Replace damaged or deformed clips
  • Press on until it engages audibly

10 - Front Information Display Control Head -J685-

  • Removing and installing. Refer to → Communication; Rep. Gr.91; Infotainment System; Infotainment System Display, Removing and Installing.

11 - Instrument Panel Vent

  • For front passenger side
  • Removing and installing. Refer to → Chapter "Passenger Side Instrument Panel Vent, Removing and Installing".

12 - Center Instrument Panel Vent

  • Removing and installing. Refer to → Chapter "Center Instrument Panel Vent, Removing and Installing".

13 - Bolt

  • 3 N·m
  • Quantity: 2

14 - Emergency Flasher Button -E229-

  • Removing and installing. Refer to → Electrical Equipment; Rep. Gr.96; Controls; Emergency Flasher Button E229, Removing and Installing.

15 - Front Passenger Side Trim

  • For the instrument panel
  • Clipped in to the instrument panel
  • Removing and installing. Refer to → Chapter "Instrument Panel Decorative Trim, Removing and Installing, Front Passenger Side".
  • Press on until it engages audibly

16 - Front Display Open/Close Button -E462-/Display Unit Button -E506-

  • Removing and installing. Refer to → Electrical Equipment; Rep. Gr.96; Controls; Overview - Center Console Controls.

17 - Information Electronics Control Module 1 -J794-

  • Equipment levels
  • Removing and installing. Refer to → Communication; Rep. Gr.91; Infotainment System; Information Electronics Control Module 1J794, Removing and Installing.

18 - Switch Unit

  • With Start/Stop Mode Button -E693-, Parallel Parking Assistance Button -E581-, Parking Aid Button -E266-, Front Passenger Airbag -Disabled- Indicator Lamp -K145-, Rear Spoiler Adjustment Switch -E127- and ASR/ESP Button -E256-
  • Removing and installing. Refer to → Electrical Equipment; Rep. Gr.96; Controls; Overview - Instrument Panel Controls.

19 - Trim

  • For Information Electronics Control Module 1 -J794-
  • Removing and installing. Refer to → Communication; Rep. Gr.91; Infotainment System; Information Electronics Control Module 1J794, Removing and Installing.

20 - Climatronic Control Module -J255-

  • Removing and installing. Refer to → Heating, Ventilation and Air Conditioning; Rep. Gr.87; Display and Control Head; Display and Control Head, Removing and Installing.

21 - Bolt

  • Quantity: 4
  • Tightening specification. Refer to → Communication; Rep. Gr.91; Infotainment System; Component Location Overview - Infotainment System.

22 - Anti-Theft Immobilizer Reader Coil -D2-

  • Removing and installing. Refer to → Electrical Equipment; Rep. Gr.96; Immobilizer; Anti-Theft Immobilizer Reader Coil, Removing and Installing.

23 - Instrument Cluster Gap Cover

  • Removing and installing. Refer to → Chapter "Instrument Cluster Gap Cover, Removing and Installing".

Overview - Instrument Panel, Windshield Projection (Head Up Display)

Overview - Instrument Panel, Windshield Projection (Head Up Display)

1 - Instrument Panel

WARNING

  • Follow all Safety Precautions when working with pyrotechnic components. Refer to → Chapter "Pyrotechnic Components Safety Precautions".
  • Follow the allocation of the airbag to the instrument panel. Refer to the Parts Catalog.
  • Removing and installing. Refer to → Chapter "Instrument Panel, Removing and Installing".

2 - Bolt

  • Tightening specification -item 4-

3 - Trim Strip

  • For the instrument panel cover
  • Removing and installing. Refer to → Chapter "Instrument Panel Upper Cover, Removing and Installing".

4 - Bolt

  • Tightening specification -item 17-

5 - Upper Instrument Panel Cover

  • Removing and installing. Refer to → Chapter "Instrument Panel Upper Cover, Removing and Installing".

6 - Cover

  • For Windshield Projection Head Up Display Control Module -J898-
  • Removing and installing. Refer to → Chapter "Instrument Panel Upper Cover, Removing and Installing".
  • Press on until it engages audibly

7 - Trim Strip

  • For the instrument panel cover
  • Removing and installing. Refer to → Chapter "Instrument Panel Upper Cover, Removing and Installing".

8 - Bolt

  • Tightening specification -item 4-

9 - Bolt

  • Tightening specification. Refer to → Electrical Equipment; Rep. Gr.90; Instrument Cluster; Overview - Windshield Projection Head Up Display.

10 - Windshield Projection Head Up Display Control Module -J898-

  • Removing and installing. Refer to → Electrical Equipment; Rep. Gr.90; Instrument Cluster; Windshield Projection Head Up Display Control Module, Removing and Installing.