Body

Rear Wheel Housing Liner, Removing and Installing

~1min read

Rear Wheel Housing Liner, Removing and Installing

Removing

  • Rear wheel removed. Refer to → Suspension, Wheels, Steering; Rep. Gr.44; Wheels and Tires.

- Remove the bolts -3-.

- Remove the clip -1- from the wheel housing liner -2-.

A66-10870

- To remove the clips -3-, unlock the release lever -2- with needle nose pliers in direction of -arrow A- and push it off the pin -1- in -direction of arrow B-.

- The Locking Pliers -VAS 6199- may also be alternatively used to release the clips.

- Remove the wheel housing liner.

Installing

Install in reverse order of removal. Note the following:

- Make sure the clip is secure after installing it.

A66-10623

Rear Wheel Housing Liner, Removing and Installing, Audi RS 6

Removing

  • Rear wheel removed. Refer to → Suspension, Wheels, Steering; Rep. Gr.44; Wheels and Tires.

- Remove the expanding rivet -3-.

- Remove the bolts -4-.

- Remove the clip -1- from the wheel housing liner -2-.

A66-11160

- To remove the clips -3-, unlock the release lever -2- with needle nose pliers in direction of -arrow A- and push it off the pin -1- in -direction of arrow B-.

- The Locking Pliers -VAS 6199- may also be alternatively used to release the clips.

- Remove the wheel housing liner.

Installing

Install in reverse order of removal. Note the following:

- Make sure the clip is secure after installing it.

A66-10623