BMW 1 Quiz
Cooling and Heating Systems

Removal and Installation of Heater Control Unit Temperature Sensor

In this manual: Cooling and Heating Systems
Introduction — 10Owner's Manual — 29Routine Care and Maintenance — 30Engine — 18Cooling and Heating Systems — 13Fuel and Exhaust Systems — 29Engine Electrical Equipment — 20Manual Transmission — 4Automatic Transmission — 4Clutch and Drive Shafts — 12Brake System — 19Suspension and Steering — 22Body — 36Body Electrical Equipment — 34Electrical Circuit Diagrams — 30On-board diagnostic system — 5
~1min read

REMOVAL
1. Remove the heater control unit.
2. Disconnect the connector (1) of the temperature sensor. Refer to the illustration.

3. Отклоните датчик назад и выньте его.

3. Tilt the sensor rearward and remove it.

INSTALLATION
1. Insert the temperature sensor and connect the connector.
2. Install the heater control unit.

Test yourself

A quick BMW 1 quiz: every answer comes with an explanation and a link to the manual page.