Home lights

If the flashing light signal is operated after the ignition and the headlights are switched off, the low beams remain on for a short time. The duration of the headlights can be set via iDrive or this function can be switched off completely.

For principles of iDrive operation, refer to.

1. Press the button.

The main menu opens.

2. Press the controller to open the menu.
3. Select "Settings" and press the controller.
4. Select "Vehicle / Tyres" and press the controller.
5. Move to the upper field. Turn the controller to select "Light" and press the controller.

6. Select "Home lights" and press the controller.
7. Turn the controller to set the duration.
8. Press the controller to confirm the setting.

This setting is stored in the memory for the key currently in use.