Permanent low beams

The permanent low beam is on when the switch is in position 0 or 3. Its power consumption is lower than that of the normal low beam.

Switching the permanent low beam on and off

For principles of iDrive operation, refer to.

1. Press the button.

The main menu opens.

2. Press the controller to open the menu.
3. Select "Settings" and press the controller.
4. Select "Vehicle / Tyres" and press the controller.
5. Move to the upper field. Turn the controller to select "Light" and press the controller.

6. Select "Daytime running lights" and press the controller.

The daytime running light circuit is switched on.

This setting is stored in the memory for the key currently in use.