Daewoo Nexia Quiz
Wheels and Tires

Tire Tread Inspection

In this manual: Wheels and Tires
OWNER'S MANUAL — 12Vehicle Maintenance — 15Maintenance — 16Engine (Single Overhead Camshaft) — 50Engine (dual overhead camshafts) — 45Cooling System — 14Fuel and Exhaust Systems — 31Engine Electrical Equipment — 16Ignition System — 8Electronic Control Unit and Sensors — 12Clutch — 11Five-Speed Transmission and Final Drive RPO MM5 — 16Automatic Transmission — 46Wheels and Tires — 17Front Suspension — 13Front Axle Drive Shafts — 10Rear Suspension — 12Brake System — 54Body — 127Heating, Ventilation and Air Conditioning System — 21Electrical System — 7Wiring Diagrams — 25
~1min read

GENERAL INFORMATION.

Aggressive driving style, frequent

acceleration and hard braking contribute to intensive tire wear.

Warning.

Tires may be used until the tread depth reaches 1.6 mm, that is,

the tread grooves must have a depth of at least 1.6 mm over the entire tire surface. However, for safety reasons, it is recommended to replace tires when the tread depth is

3 mm.

M+S tires have sufficient road grip at a tread depth of at least 4 mm.

Inspect the tire for cuts and determine their depth. If cuts reach the cord, the steel cord will corrode from penetrating moisture.

Test yourself

A quick Daewoo Nexia quiz: every answer comes with an explanation and a link to the manual page.