Daewoo Nexia Quiz
Wheels and Tires

Front Wheel Toe-In Adjustment

In this manual: Wheels and Tires
OWNER'S MANUAL — 12Vehicle Maintenance — 15Maintenance — 16Engine (Single Overhead Camshaft) — 50Engine (dual overhead camshafts) — 45Cooling System — 14Fuel and Exhaust Systems — 31Engine Electrical Equipment — 16Ignition System — 8Electronic Control Unit and Sensors — 12Clutch — 11Five-Speed Transmission and Final Drive RPO MM5 — 16Automatic Transmission — 46Wheels and Tires — 17Front Suspension — 13Front Axle Drive Shafts — 10Rear Suspension — 12Brake System — 54Body — 127Heating, Ventilation and Air Conditioning System — 21Electrical System — 7Wiring Diagrams — 25
~1min read
010203040502015N·mlb·ft
Tightening torque found on this page

GENERAL INFORMATION

Регулировка схождения передних колес
Front Wheel Toe-In Adjustment A. ADJUST TOE-IN BY TURNING THE ADJUSTING SCREW.

B. LOOSEN THE CLAMP BOLTS. AFTER ADJUSTMENT, TIGHTEN TO 20 N·m.

1. TIE ROD END.

2. FRONT SUSPENSION STRUT

Toe-in of the front wheels is adjusted by changing the length of the tie rods. Loosen.

clamp bolts B on the left and right tie rods. Then turn

adjusting screws A to set the specified front wheel toe-in. The lengths of the left and right tie rods must be equal.

Tighten the tie rod clamp bolts to 20 N·m.

Test yourself

A quick Daewoo Nexia quiz: every answer comes with an explanation and a link to the manual page.