Rear light units

They include position lights (LED), turn signals and brake lights.

To replace a bulb, proceed as follows:

• unscrew screws A fig. 87, disconnect electrical connector B, then remove the lens assembly outward;
• disconnect the bulb holder using the fasteners C fig. 88;
• remove the bulb to be replaced, applying light pressure and turning it counterclockwise, then replace it;
• install the bulb holder, reconnect the electrical connector, position the unit on the car body and screw in mounting screws A fig. 87.

Reversing light/ rear fog light

The reversing lights and rear fog light are located in the rear bumper. To replace them, contact an authorised Fiat service centre (ASO).