General Procedures - Power Sunroof Initialization

Initialization

1. 1
   With the driver door closed, start the engine, then turn it off.
2. 2
   Open the driver door.
3. 3
   Set the ignition switch to the ON (engine off) position.
4. 4
   • To initialize the sliding glass, press and HOLD the sliding glass close switch until the glass moves to the fully closed position, then to the fully open position, and finally to the fully closed position. Release the sliding glass close switch.

   • To initialize the sunshade, press and HOLD the sunshade close switch until the sunshade moves to the fully closed position, then to the fully open position, and finally to the fully closed position. Release the sunshade close switch.
5. 5
   • Set the ignition switch to the OFF position.

   • Check the system for normal operation. If the sunroof panel does not operate correctly, repeat the procedure.