Removal and Installation - Driver Side Register

Removal

1. 1
   Release the retainers and remove the trim panel.

   

2. 2
   
   Remove the bolts and the display unit.
   

   • Disconnect the electrical connector.
     Torque: 22 lb-in (2.5 N·m)

   

3. 3
   
   Remove the bolts, release the retainers and remove the center instrument panel finish panel.
   

   • Disconnect the electrical connector.
     Torque: 22 lb-in (2.5 N·m)

   

4. 4
   Remove the steering column shroud.

   

5. 5
   Remove the bolts, release the clips and remove the IPC trim panel.
   Torque: 22 lb-in (2.5 N·m)

   

6. 6
   Release the tabs and remove the driver side register.

   

Installation

1. To install, reverse the removal procedure.