Removal and Installation — Rear Door

Special Service Tools / General Equipment

Door Check

Removal

1. 1
   Open the door.

   

2. 2
   Remove the rear door check arm bolt.
   Torque: 18 lb-ft (25 N·m)

   

3. 3
   Disconnect the rear door electrical connectors.

   

4. 4
   1. Remove the bolts.
      Use general equipment: door hoist
      Torque: 22 lb-ft (30 N·m)

   2. Remove the bolts.
      Torque: 35 lb-ft (48 N·m)

   

5. 5
   Remove the door.

   

Installation

1. 1
   To install, reverse the removal procedure.
2. 2
   Check the alignment and correct if necessary.
   Refer to: Rear Door Alignment (501-03 Body Closures, General Procedures).