Ford Fiesta Quiz
Lighting

Front Fog Lamp Aiming. General Procedures

In this manual: Lighting
Service Information — 27Suspension — 48Transmission — 9Brake System — 52Steering — 21Engine — 140Manual Transmission, Clutch, Transfer Case and Power Transfer Unit — 48Exhaust System — 6Fuel System — 21Climate Control System — 58Instrumentation and Warning Systems — 26Battery and Charging System — 20Infotainment Systems — 41Lighting — 29Power Distribution — 11Electronic Function Group — 30Body and Paint — 275Frame and Mounting — 3
3steps
~18min
2/5difficulty
Done 0 of 3

Adjustment

    1. Before starting the fog lamp assembly aiming procedure:
    • Check the tire inflation pressures.
    • Make sure there is no cargo in the vehicle other than a half tank of fuel.
    • Make sure the vehicle is on a level surface.
    • Make sure the fog lamps and headlamps are clean.
    • Make sure the headlamps operate and are correctly aimed.
  2. Park the vehicle on a level surface approximately 7.6 m (24.93 ft) from a vertical wall or screen directly in front of it.
  3. Correct visual fog lamp aim is the top edge of the high-intensity zone 101.6 mm (4 in) below the horizontal center of the fog lamps.

Test yourself

A quick Ford Fiesta quiz: every answer comes with an explanation and a link to the manual page.