Lighting

Headlamp Assembly. Removal and Installation

4steps
~24min
2/5difficulty
0102030405054N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Removal

  1. Disconnect the headlamp electrical connector.
  2. Remove the bolt and the headlamp assembly.
    Torque: 44 lb-in (5 N·m)

Installation

  1. To install, reverse the removal procedure.
  2. If a new headlamp assembly was installed.
    REFER TO: Headlamp Aiming (417-01 Exterior Lighting, General Procedures).

Test yourself

A quick Ford Fiesta quiz: every answer comes with an explanation and a link to the manual page.