Ford Fiesta Quiz
Lighting

Back-Up Lamp Switch. Removal and Installation

In this manual: Lighting
Service Information — 27Suspension — 48Transmission — 9Brake System — 52Steering — 21Engine — 140Manual Transmission, Clutch, Transfer Case and Power Transfer Unit — 48Exhaust System — 6Fuel System — 21Climate Control System — 58Instrumentation and Warning Systems — 26Battery and Charging System — 20Infotainment Systems — 41Lighting — 29Power Distribution — 11Electronic Function Group — 30Body and Paint — 275Frame and Mounting — 3
5steps
~30min
2/5difficulty
010203040501511N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Removal

  1. Position the vehicle in NEUTRAL on a hoist. For additional information, refer to Section 100-02.
  2. Disconnect the back-up lamp switch electrical connector.
  3. Remove the back-up lamp switch.

Installation

  1. Install the back-up lamp switch.
    Torque: 133 lb-in (15 N·m)
  2. Connect the back-up lamp switch electrical connector.

Test yourself

A quick Ford Fiesta quiz: every answer comes with an explanation and a link to the manual page.