Ford Fiesta Quiz
Lighting

Stoplamp Switch. Removal and Installation

In this manual: Lighting
Service Information — 27Suspension — 48Transmission — 9Brake System — 52Steering — 21Engine — 140Manual Transmission, Clutch, Transfer Case and Power Transfer Unit — 48Exhaust System — 6Fuel System — 21Climate Control System — 58Instrumentation and Warning Systems — 26Battery and Charging System — 20Infotainment Systems — 41Lighting — 29Power Distribution — 11Electronic Function Group — 30Body and Paint — 275Frame and Mounting — 3
4steps
~24min
2/5difficulty
Done 0 of 4

Removal

  1. NOTICE: Do not press, pull or otherwise move the brake pedal when installing the stop lamp switches and the cruise control deactivation switch. Install these switches with the brake pedal pad plunger attached to the brake pedal and with the brake pedal in the at-rest position. Installing these switches with the brake pedal in any other position will result in incorrect adjustment and damage to the switches.

    Disconnect the stop lamp switch electrical connector.
    1. Rotate the stoplamp switch clockwise.
    1. Remove the switch.

Installation

  1. To install, reverse the removal procedure.
  2. Adjust the stoplamp switch.
    REFER TO: Brake Pedal Position (BPP) Switch Adjustment (206-09 Anti-Lock Brake System (ABS) and Traction Control System, General Procedures).

Test yourself

A quick Ford Fiesta quiz: every answer comes with an explanation and a link to the manual page.