Ford Focus Quiz
Powertrain

Engine Oil Pressure (EOP) Switch - Engine - 2.0L - in Vehicle Repair

In this manual: Powertrain
Vehicle - General — 4Accessories — 40Body — 237Chassis — 113Electrical — 19HVAC — 44Powertrain — 292
4steps
~24min
2/5difficulty
010203040501511N·mlb·ft
Tightening torque found on this page
Done 0 of 4
Material
Item Specification
Motorcraft® Thread Sealant with PTFE TA-24 WSK-M2G350-A2
Removal and Installation
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02.
  2. Disconnect the Engine Oil Pressure (EOP) switch electrical connector.
  3. Remove the EOP switch.
    • To install, tighten to 15 N·m.
  4. NOTE: Apply thread sealant to the EOP switch threads.

    To install, reverse the removal procedure.

Test yourself

A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.