Engine System - General Information
Specifications show the expected minimum or maximum condition. Refer to the appropriate section in Group 303 for the procedure.
NOTE:If a component fails to meet the specifications, it is necessary to refinish it or install a new component. Wear limits are provided as an aid to determine if the component can be refinished. A new component must be installed when any component fails to meet specifications and cannot be refinished.
NOTE:This section contains information, steps and procedures that may not be specific to this engine.
This section covers general procedures and diagnosis and testing of the engine system, except for exhaust emission control devices, which are covered in the Powertrain Control/Emissions Diagnosis (PC/ED) manual.
The engine incorporates the following features: Refer to the appropriate section in Group 303 for the procedure.
- Crankcase ventilation or breather system
- Exhaust emission control system
- Evaporative Emission (EVAP) control system
Some engines incorporate a fail-safe cooling system. Refer to the appropriate section in Group 303 for the procedure.
The engine, fuel system, ignition system, emissions system and exhaust system all affect exhaust emission levels and must be maintained according to the maintenance schedule. Refer to the scheduled Maintenance Guide.
Correct engine identification is required to order parts. Refer to the appropriate section in Group 303 for the procedure.
For complete vehicle and engine identification codes, refer to Section 100-01.
Test yourself
A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.