Powertrain/Drivetrain Mount Neutralizing

Refer to the appropriate section and procedure for special instructions on loosening and tightening mount fasteners.

1. 1
   With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02.
2. 2
   Loosen, but do not remove, the powertrain/drivetrain mount fasteners.
3. 3
   Lower the vehicle.
4. 4
   NOTICE: Do not twist or strain the powertrain/drivetrain mounts or damage to the mounts may occur.

   Start the vehicle and move it in forward 0.6-1.2 m (2-4 ft). Then move the vehicle in reverse the same distance.

5. 5
   Raise and support the vehicle.
6. 6
   Tighten the powertrain/drivetrain mount fasteners.
7. 7
   Lower the vehicle.
8. 8
   Test the system for normal operation.