Power Sunroof Initialization. General Procedures

Initialization

1. 1
   Open the driver door and turn the ignition on, engine off.
2. 2
   Close the driver door and wait until the map/dome lamps turn off.
3. 3
   Press the vent button (the sunroof glass moves to the full vent position).
4. 4
   Press the left map lamp 1 time to turn it on.
5. 5
   Press the right map lamp 4 times until it turns off.
6. 6
   Press the left map lamp 1 time to turn it off.
7. 7
   Press the left map lamp 1 time to turn it on.
8. 8
   Open the driver door.
9. 9
   Turn the ignition off and then on.
10. 10
    Press and hold the vent button while the sunroof glass fully opens and then finally, to the fully closed position . Release the vent button.
11. 11
    • Turn the ignition key to OFF, close the door and turn off the left map lamp.

    • Check the system for normal operation. If the sunroof panel does not operate correctly, repeat the procedure.