Timing Adjustment. General Procedures

Special Service Tools / General Equipment

Flat-blade screwdriver

Adjustment

NOTICE: The new frame assembly is not equipped with a motor. When the motor is not installed and the frame is moved, the cables/mechanisms may move freely, which causes the timing adjustment to fail. Before transferring the motor to the new frame assembly, the timing adjustment must be performed to ensure correct sunroof operation.

1. 1
   Both sides.
   Inspect and make sure the mechanisms are fully extended forward in the frame guides.
   Use common equipment: flat-blade screwdriver.

   

2. 2
   Both sides.
   Move the cable brackets forward to the stop, setting the mechanisms to the VENT position.
   Use common equipment: flat-blade screwdriver.

   

3. 3

   NOTICE: Installing the motor will lock the mechanisms and prevent them from moving. When installing the motor, make sure the mechanisms do not move.

   Install the motor and bolts.
   Torque: 35 lb-in (4 N·m)