Technical specifications

Technical specifications - 1.2L TiVCT

~2min read
1special tools
DANGER

The air conditioning refrigerant system contains high-pressure refrigerant. Work on the air conditioning refrigerant system must only be carried out by qualified technicians. Opening the air conditioning refrigerant system may cause injury.

Capacity

Action Capacity
Engine oil capacity, including oil filter. 4,05 L
Engine oil capacity, excluding oil filter. 3,75 L
Coolant capacity. 6,3 L
Fuel tank capacity 42 L
Washer system capacity. 4,5 L
Air conditioning refrigerant capacity. Refrigerant - R1234yf. 0.59 kg
Air conditioning refrigerant system compressor oil capacity. Refrigerant - R1234yf. 120 ml

Engine oil top-up

,75 L

Quantity of engine oil required to raise the level indicated on the dipstick from minimum to maximum.

Specifications

Only use fluid that meets Ford specifications. Use oils and fluids that meet the specified viscosity and specifications.

Note: Using other types of fluids may cause damage that is not covered by the vehicle warranty.

Materials

Name Specification
Ford-Castrol Magnatec WSS-M2C913-D
Ford-Castrol Magnatec WSS-M2C948-B
Transmission oil - 75W FE 7U7J-M2C200-BA/CA/DA WSS-M2C200-D2
Super Plus Premium coolant FU7J-19544-xx WSS-M97B44-D
DOT 4 LV High Performance brake fluid BU7J-M6C65-xxxx WSS-M6C65-A2
Windshield washer fluid 2U7J-M8B16-AA/CA/DA, 3U7J-19523-GA, FU7J-19C544-AA/BA/DA/EA/GA/HA WSS-M14P19-A
Refrigerant - R-1234yf WSS-M17B21-A
A/C compressor oil DE-12 FU7J-M2C300-AA WSS-M2C300-A2

If an engine oil meeting the WSS-M2C913-D or WSS-M2C948-B specification cannot be obtained, an SAE 5W-30 engine oil meeting ACEA A5/B5 is acceptable.

Note: Do not use more than 1 L of alternative engine oil between scheduled maintenance intervals.

Note: The correct compressor oil and refrigerant must be used for the air conditioning system when the system is serviced. Using incorrect air conditioning compressor oil or refrigerant may cause damage that is not covered by the vehicle warranty.

Using oils and fluids that do not meet the specified specifications and viscosity grade may result in:

  • damage to components, which may not be covered by the vehicle warranty.
  • longer starter motor engagement times.
  • higher emission levels.
  • Reduced engine performance.
  • Reduced fuel economy.
  • Reduced brake performance.
Materiali
Ford recommends the use of Castrol and Ford oils and lubricants.

Fuel consumption data - 1.2L TiVCT

Urban Extra-urban Combined CO2 emissions
L/100 km L/100 km L/100 km g/km
6.8-6.3 L/100 km 4.1-3.9 L/100 km 5.1-4.8 L/100 km 110-117

Fuel consumption and CO2 values were determined from laboratory tests carried out in accordance with Regulation (EC) 715/2007 or EC Regulation 692/2008 and subsequent amendments.

Test yourself

A quick Ford Ka quiz: every answer comes with an explanation and a link to the manual page.