Ford Mondeo Quiz
MyKey

Creating a MyKey

In this manual: MyKey
Introduction — 9Overview — 6Child safety — 5Seat belts — 4Supplemental Restraint System — 8Keys and Remote Controls — 4MyKey — 9Locks — 3Safety — 4Steering wheel — 6Wipers and washers — 4Lighting — 15Windows and mirrors — 7Instrument cluster — 4Information Displays — 3Climate control unit — 9Seats — 10Auxiliary power points — 1Storage Compartments — 4Engine Starting and Stopping — 7Unique Driving Characteristics — 1Fuel and Refueling — 7High-voltage battery — 3Transmission — 1Brakes — 5Traction control — 3Electronic Stability Control — 3Parking Aids — 7Cruise control — 4Driver assistance — 21Vehicle Loading — 1Towing — 3Driving tips — 6Roadside assistance in emergencies — 11Fuses — 3Maintenance — 15Vehicle Cleaning — 6Wheels and Tires — 8Capacities and specifications — 3Audio system — 8SYNC — 7SYNC 2 — 10Appendices — 3
9steps
~54min
2/5difficulty
Done 0 of 9

Use the information display to create a MyKey:

  1. Insert the key you want to program into the ignition switch. If your vehicle is equipped with a Push Button Start, insert the Intelligent Access key blade into the backup slot. For the location of the backup slot, see another chapter. See Starting and Stopping the Engine.
  2. Switch on the ignition.
  3. Using the information display controls, go to the main menu and select Settings, then MyKey by pressing OK or the > button.
  4. To select Create MyKey, press OK or the > button.
  5. When prompted, press and hold the OK button until a message asks you to label this key as a MyKey. The key will be restricted at the next start.

MyKey creation was successful. Make sure to label the key so you can tell it apart from Admin keys.

You can also program configurable settings for the key(s). Refer to Programming/Changing Configurable Settings.

Programming/Changing Configurable Settings

Use the information display to access your MyKey configurable settings.

  1. Turn the ignition on using an Admin key or Admin Key blade.
  2. Using the information display controls, go to the main menu and select Settings, then MyKey by pressing OK or the > button.
  3. Use the arrow buttons to scroll to a function.
  4. Press OK or > to make a selection.

Note: You can clear or change your MyKey settings at any time during the same key cycle in which you created the MyKey. However, once you have turned the engine off, you will need to use an Admin key to change or clear your MyKey settings.

Test yourself

A quick Ford Mondeo quiz: every answer comes with an explanation and a link to the manual page.