Ford Mustang Quiz
Engine

Idle Air Control (IAC) Valve - Mach I

In this manual: Engine
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

Removal and Installation

1. Remove the air intake scoop. For additional information, refer to Section.

2. Disconnect the idle air control (IAC) valve electrical connector.

Idle Air Control (IAC) Valve - Mach I

3. Remove the bolts, the IAC valve and the gasket.

Idle Air Control (IAC) Valve - Mach I

4. NOTE: Install a new gasket if necessary.

To install, reverse the removal procedure.

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.