Ford Mustang Quiz
Engine

Mass Air Flow (MAF) Sensor - Mach I

In this manual: Engine
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

Removal

CAUTION: The mass air flow (MAF) sensor hot wire sensing element and housing are calibrated as a unit and must be repaired as a complete assembly. Do not damage the sensing element (internal to housing) or possible failure to the mass air flow sensor may occur

1. Disconnect the battery ground cable. For additional information, refer to Section.

2. Remove the air cleaner outlet tube. For additional information, refer to Section.

3. Remove the mass air flow sensor (MAF).

  • Disconnect the connector.
  • Remove the four nuts and the MAF sensor.
Mass Air Flow (MAF) Sensor -Mach I

Installation

1. To install, reverse the removal procedure.

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.