Throttle Position (TP) Sensor

Removal

NOTE: The 3.8L engine is shown; the 4.6L (2V) is similar.

1. Disconnect the battery ground cable. For additional information, refer to Section.

2. Remove the throttle position (TP) sensor.

• Disconnect the connector.
• Remove the screws, and remove the sensor.

Installation

1. To install, reverse the removal procedure.

Throttle Position (TP) Sensor -Cobra

Removal and Installation

1. Disconnect the throttle position (TP) sensor electrical connector.

2. Remove the bolts and the TP sensor.

3. To install, reverse the removal procedure.

Throttle Position (TP) Sensor -Mach I

Removal and Installation

1. Remove the air intake scoop bracket. For additional information, refer to Section.

2. Disconnect the throttle position (TP) sensor electrical connector.

3. Remove the bolts and the TP sensor.

4. To install, reverse the removal procedure.