Ford Mustang Quiz
Engine

Powertrain Control Module (PCM)

In this manual: Engine
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

Removal

1. Disconnect the battery ground cable. For additional information, refer to Section.

2. Remove the RH front door scuff plate.

Powertrain Control Module (PCM)

3. Remove the RH cowl side trim panel.

  • Remove the pin-type retainer.
  • Remove the panel.
Powertrain Control Module (PCM)

4. Disconnect the connectors and position them aside.

Powertrain Control Module (PCM)

5. Remove the bolts and the bracket.

Powertrain Control Module (PCM)

6. Loosen the bolt and remove the connector.

Powertrain Control Module (PCM)

7. Remove the bolt and the powertrain control module (PCM).

Powertrain Control Module (PCM)

Installation

1. To install, reverse the removal procedure.

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.