Lamp Assembly - Fog Lamp (GT)

Removal

1. Raise and support the vehicle.

2. Remove the screw.

3. Partially lower the vehicle and remove the fog lamp assembly.

1. Disconnect the electrical connector.

2. Remove the two screws.

3. Remove the fog lamp assembly and replace the bulb if necessary.

Installation

1. NOTE: Be sure the fascia clip is correctly installed on the bottom side of the fog lamp assembly bracket.

To install, reverse the removal procedure.

Lamp Assembly -Fog Lamp (Cobra)

Removal and Installation

1. Raise and support the vehicle. For additional information, refer to Section.

2. Remove the fog lamp assembly.

1. Disconnect the electrical connector.

2. Remove the four screws.

3. To install, reverse the removal procedure.