Ford Mustang Quiz
Lighting

Lamp Switch - Brake Pedal Position (BPP)

In this manual: Lighting
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

Removal

1. Disconnect the battery ground cable.

2. Remove the brake pedal position (BPP) switch.

1. Remove the clip.

2. Remove the retainer.

3. Disconnect the electrical connector.

4. Remove the BPP switch.

Lamp Switch - Brake Pedal Position (BPP)

Installation

1. NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.

To install, reverse the removal procedure.

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.