Ford Mustang Quiz
Engine

Removal

In this manual: Engine
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

1. Disconnect the battery negative cable.

2. Drain the engine cooling system.

3. Remove the RH exhaust manifold. For additional information, refer to Exhaust Manifold RH in this section.

4. Remove the lower intake manifold. For additional information, refer to Lower Intake Manifold in this section.

5. Remove the push rods. For additional information, refer to Push Rod in this section.

6. Remove the drive belt.

7. Disconnect the A/C manifold and tube assembly.

8. Disconnect the A/C compressor clutch electrical connector.

Cylinder Head RH

9. Remove the A/C compressor bracket.

Cylinder Head RH

10. Remove the three exhaust manifold studs.

Cylinder Head RH

11. NOTE: Discard the cylinder head gasket.

NOTE: Record the location of the long bolts and the short bolts.

Remove the cylinder head. Discard the cylinder head bolts.

Cylinder Head RH

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.