Honda Civic Quiz
Electrical

Alternator Removal and Installation (Except K24Z7)

In this manual: Electrical
Accessories — 57Body — 310Chassis — 96Electrical — 15HVAC — 39Powertrain — 300Moonroof/Sunroof — 9Roof Drainage — 5Wiper Arm/Nozzle Adjustment — 1ELD Removal and Installation — 1Under-Dash Fuse/Relay Box Removal and Installation (KA KX models without Keyless Access System) — 1Under-Dash Fuse/Relay Box Removal and Installation (KA models with Keyless Access System) — 1
~1min read

118100

  1. Battery Terminal - Disconnection

1.

Make sure the ignition switch is in LOCK (0), or the vehicle ignition in the OFF mode.

2.

Disconnect and isolate the negative cable with the battery sensor (A) from the battery.

NOTE:

Always disconnect the negative side first.

To protect the battery sensor connector (B) from damage, do not hold it when removing the negative terminal.

Do not disconnect the battery sensor from the negative terminal (C).

3.

Disconnect the positive cable (D) from the battery.

  1. Drive Belt

1.

Move the auto-tensioner (A) counterclockwise to relieve tension from the drive belt (B).

2.

Remove the drive belt.

  1. Alternator

1.

Disconnect the connector and the cable.

2.

Remove the harness connector (A) and the harness clamps (B).

3.

Remove the alternator.

  1. Alternator

mmn-m(2

1.

Install the alternator.

i.nmm(n.i

2.

Connect the connector and the cable. Make sure the crimped side of the ring terminal faces away from the alternator when you connect it.

3.

Install the harness connector (A) and the harness clamps (B).

  1. Drive Belt

1.

Move the auto-tensioner (A) counterclockwise.

2.

Install the drive belt (B).

  1. Battery Terminal - Reconnection

NOTE: If the battery performs abnormally, test the battery.


1.

Clean the battery terminals.

2.

Connect the positive cable (A) to the battery.

NOTE: Always connect the positive side first.

3.

Connect the negative cable and the battery sensor (B) to the battery.

NOTE: To protect the battery sensor connector (C) from damage, do not hold it when installing the negative terminal.

4.

Apply multipurpose grease to the terminals to prevent corrosion.

Test yourself

A quick Honda Civic quiz: every answer comes with an explanation and a link to the manual page.