Brake Pedal Repair Procedures

Removal

1. 1
   Turn the ignition switch OFF and disconnect the negative (-) battery cable.
2. 2
   Remove the lower driver airbag panel. (Refer to Body - "Driver Airbag Module")
3. 3
   Disconnect the stop lamp switch connector (A).

   

4. 4
   Remove the wiring clip from the brake pedal.

   

5. 5
   Remove the bracket mounting nut (A).

   Tightening torque: 16.7 ~ 26 N·m

   

6. 6
   Remove the lock pin (A) and the flat head pin (B).

   

7. 7
   Remove the mounting nuts (A).

   Tightening torque: 16.7 ~ 26 N·m

   

8. 8
   To install, reverse the removal procedure.

Inspection

1. 1
   Inspect the brake pedal for bending or twisting.
2. 2
   Inspect the brake pedal return spring for damage.
3. 3
   Inspect the stop lamp switch.