Headlight, Parking Light, Turn Signal Light and Side Marker Light

Enter

(1) Headlight (High and Low Beam)
(2) Daytime Running Light (DRL) and Parking Light
(3) Turn Signal Light
(4) Side Marker Light

Headlight (Halogen Bulb)

WARNING

• Handle halogen bulbs with care. Halogen bulbs contain pressurized gas; glass fragments may fly apart and cause injury.
• Wear protective glasses when replacing a bulb. Allow the bulb to cool before handling.

• Always handle them carefully and avoid scratches and scuffs. If the bulbs are lit, avoid contact with liquids.
• Never touch the glass with bare hands. Residual oil may cause the bulb to overheat and explode when turned on.
• The bulb should only operate when it is installed in the headlight.
• If the bulb is damaged or cracked, replace it immediately and dispose of it carefully.

■ High Beam/Low Beam

1. Open the hood.

2. Disconnect the negative battery cable.

3. Remove the headlight bulb cover by turning it counterclockwise.

4. Disconnect the headlight bulb socket connector.

5. Disconnect the headlight bulb retaining wire by pressing the end and pushing it upward.

6. Remove the bulb from the headlight assembly.

7. Install a new bulb and insert the headlight bulb retaining wire into position, aligning the wire with the groove on the bulb.

8. Connect the headlight bulb socket.

9. Install the headlight bulb cover by turning it clockwise.

Information

Headlight aim should be adjusted after an accident or after the headlight assembly is reinstalled at an authorized HYUNDAI dealer.

Parking Light/Daytime Running Light (LED)

Your vehicle is equipped with LED lights. LED lights are not replaceable. If an LED light does not work, have the vehicle inspected at an authorized HYUNDAI dealer.

Parking Light/Daytime Running Light (Bulb Type)

1. Open the hood.

2. Disconnect the negative battery cable.

3. Remove the socket from the assembly by turning the socket counterclockwise until the protrusions on the socket align with the slots in the assembly.

4. Remove the bulb from the socket by pressing it in and turning it counterclockwise until the protrusions on the bulb align with the slots in the socket. Pull the bulb out of the socket.

5. Install a new bulb by inserting it into the socket and turning it until it locks into place.

6. Install the socket into the assembly by aligning the protrusions on the socket with the slots in the assembly.

7. Insert the socket into the assembly and turn the socket clockwise.

Turn Signal

If the bulb does not light, have the vehicle inspected at an authorized HYUNDAI dealer.

Side Marker Light (Bulb)

If the bulb does not light, have the vehicle inspected at an authorized HYUNDAI dealer.

Side Marker Light (LED)

Your vehicle is equipped with LED lights. LED lights are not replaceable. If an LED light does not work, have the vehicle inspected at an authorized HYUNDAI dealer.

Type B

(1) Headlight (Low Beam)
(2) Headlight (High Beam)
(3) Daytime Running Light (DRL) and Parking Light
(4) Turn Signal Light
(5) Side Marker Light

Headlight/Side Marker Light/Parking Light/Daytime Running Light (LED)

Your vehicle is equipped with LED lights. LED lights are not replaceable. If an LED light does not work, have the vehicle inspected at an authorized HYUNDAI dealer.

Turn Signal Indicator

If the bulb does not light, have the vehicle inspected at an authorized HYUNDAI dealer.