Hyundai Elantra AD Quiz
Body (Interior and Exterior)

Rear Door Outside Handle Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 84Engine Electrical System — 60Emission Control System — 24Engine Control System/Fuel System — 90Automatic Transmission — 92Drive Shaft and Axle — 20Suspension System — 31Steering — 20Restraints — 50Brake System — 63Body (Interior and Exterior) — 214Body Electrical System — 221Heating, Ventilation, and Air Conditioning — 71
4steps
~24min
2/5difficulty
0102030405010.88N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Replacement

  1. Remove the plug hole cover (B).
  2. Loosen the mounting bolt and remove the front door lock (A).

    Tightening torque: 7.8 ~ 10.8 N·m

  3. Remove the rear door outside handle (A) by pressing it in the direction of the arrow.
  4. To install, reverse the removal procedure.
    • Check that the door locks/unlocks and opens/closes properly.
    • Make sure to install the outside handle escutcheon (A) between the outside handle and the door panel.

Test yourself

A quick Hyundai Elantra AD quiz: every answer comes with an explanation and a link to the manual page.