Hyundai Elantra AD Quiz
Body (Interior and Exterior)

Rear Door Body Side Weatherstrip Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 84Engine Electrical System — 60Emission Control System — 24Engine Control System/Fuel System — 90Automatic Transmission — 92Drive Shaft and Axle — 20Suspension System — 31Steering — 20Restraints — 50Brake System — 63Body (Interior and Exterior) — 214Body Electrical System — 221Heating, Ventilation, and Air Conditioning — 71
3steps
~18min
2/5difficulty
0102030405021.616N·mlb·ft
Tightening torque found on this page
Done 0 of 3

Replacement

  1. Loosen the adjusting shim bolt (B) of the rear door.

    Tightening torque: 16.7 ~ 22 N·m

  2. Disengage the clips, then remove the rear door side seal (A).
  3. To install, reverse the removal procedure.
    • Replace all damaged clips.

Test yourself

A quick Hyundai Elantra AD quiz: every answer comes with an explanation and a link to the manual page.