Operation of the Function

Operating Conditions

Smart Cruise Control will operate when the following conditions are met.

Main Function

• The transmission is in D (Drive)
• The driver's door is closed
• EPB (Electronic Parking Brake) is not applied
• Your vehicle speed is within the operating speed range
  -- 5~180 km/h: when there is no vehicle ahead
  -- 0~180 km/h: when there is a vehicle ahead
• ESC (Electronic Stability Control), TCS (Traction Control System), or ABS is on
• ESC (Electronic Stability Control), TCS (Traction Control System), or ABS is not controlling the vehicle
• Engine speed is not in the red zone
• Forward Collision-Avoidance Assist braking control is not operating

Information

When stopped, if there is no vehicle ahead of your vehicle, the system will activate when the brake pedal is pressed.

Passing Assist

Passing Assist will operate when the left turn signal indicator is on while Smart Cruise Control is operating, and the following conditions are met:

• Your vehicle speed is above 40 mph (60 km/h)
• Hazard warning lights are off
• No vehicle is detected ahead of you
• Deceleration is not required to maintain the distance from the vehicle ahead

WARNING

• When the turn signal indicator is turned to the left (left-hand drive) or to the right (right-hand drive) while there is a vehicle ahead, your vehicle may accelerate temporarily. Always pay attention to road conditions.
• Regardless of your driving country, the Passing Assist acceleration will operate when the conditions are satisfied. When using this function in countries with a different driving direction, always check road conditions at all times.