Feature Settings

Setting

[A] : Type A, [B] : Type B

To turn on the feature

• Press the Driving Assist button to turn on the system. The set speed will be set to the current speed shown on the cluster.
• If there is no vehicle ahead of you, the set speed will be maintained. If there is a vehicle ahead, the speed may be reduced to maintain the distance to the vehicle ahead. If the vehicle ahead accelerates, your vehicle will accelerate to the set speed and then maintain a constant speed.

Information

• If your vehicle speed is within 0~ 30 km/h when you press the Driving Assist button, Smart Cruise Control set speed will be set to 20 mph (30 km/h).
• The Driving Assist button symbol ( ) may vary depending on your vehicle's trim.

[A] : Type A, [B] : Type B

To set the distance to the vehicle ahead

Each time the Distance button is pressed, the distance changes as follows:

Information

• If you are driving at 56 mph (90 km/h), the distance is maintained as follows:
  Distance 4 - approximately 172 ft (53 m)
  Distance 3 - approximately 130 ft (40 m)
  Distance 2 - approximately 106 ft (30 m)
  Distance 1 - approximately 82 ft (25 m)
• The distance is set to the last setting when the engine is restarted, or when the system was temporarily canceled.

To Increase the Speed

• Press the + switch up and release it immediately. The set speed will increase by 1 mph (1 km/h) each time the switch is operated in this way.
• Push and hold the + switch up. Monitor the set speed on the cluster. The cruise speed will increase by 5 mph or 10 km/h each time the switch is operated in this manner. Release the switch when the desired speed is displayed, and the vehicle will accelerate to that speed. You can set the speed up to 122 mph (180 km/h).

WARNING

Check the driving conditions before using the + switch. The vehicle speed may increase rapidly when you push and hold the + switch.

To Decrease the Speed

• Press the - switch down and release it immediately. The set speed will decrease by 1 mph (1 km/h) each time the switch is operated in this way.
• Push and hold the - switch down. Monitor the set speed on the cluster. The cruise speed will decrease by 5 mph or 10 km/h each time the switch is operated in this manner.
  Release the switch at the speed you want to maintain. You can set the speed down to 20 mph (30 km/h).

[A] : Type A, [B] : Type B

To temporarily cancel the function

pressOperate the switch or press the brake pedal to temporarily cancel Smart Cruise Control.

[A] : Type A, [B] : Type B

To Resume the Function

To resume Smart Cruise Control after the system has been canceled, press +, -, orswitch.

If you press the + switch up or the - switch down, the vehicle speed will be set to the current speed shown in the instrument cluster.

If you press theswitch, and the vehicle speed will resume to the set speed.

WARNING

Check the driving conditions before using the switch. The vehicle speed may increase or decrease rapidly when you press the switch.

[A] : Type A, [B] : Type B

To Cancel the Function

Press the Driving Assist button to turn the Smart Cruise Control system off.

Information

If your vehicle is equipped with Manual Speed Limit Assist, press and hold the Driving Assist button to turn off Smart Cruise Control. However, Manual Speed Limit Assist will remain on.

Smart Cruise Response

With the engine on, select "Driver Assistance → SCC Response" from the settings menu to select the sensitivity of the vehicle's speed when following a vehicle ahead to maintain the set distance.

Warning Volume

With the engine on, select "Driver Assistance → Warning Volume" from the Settings menu to change the warning volume to "High", "Medium", or "Low" for Smart Cruise Control.

If you change the Warning Volume, the warning volume of other Driver Assistance systems may change.

Information

If the engine is restarted, the warning volume will retain the last setting.