Limitations of the Function

The Blind-Spot Collision Warning system may not operate normally, or the system may activate unexpectedly under the following conditions:

• Inclement weather, such as heavy snow or heavy rain.
• The rear corner radar is covered with snow, rain, dirt, etc.
• The temperature around the rear corner radar is high or low.
• Driving on a highway (or motorway) ramp.
• The road surface (or surrounding ground) contains abnormal metallic components (for example, due to subway construction).
• Stationary objects are located near the vehicle, such as sound barriers, guardrails, median dividers, entrance barriers, street lights, signs, tunnels, walls, etc. (including double structures).
• Driving in large open areas where there are few vehicles or structures (for example, desert, meadow, suburbs, etc.).
• Driving on a narrow road where trees or grass overgrow.
• Driving on a wet road surface, such as a puddle on the road.
• Another vehicle is following very closely behind your vehicle, or another vehicle passes very close to your vehicle.
• Another vehicle is traveling very fast and passes your vehicle in a short time.
• Your vehicle passes another vehicle.
• Your vehicle changes lanes.
• Your vehicle accelerates rapidly while a vehicle next to you starts at the same time.
• A vehicle in the adjacent lane is two lanes away from you, or when a vehicle two lanes away moves into the next lane next to you.
• A trailer or carrier is installed around the rear corner radar.
• The bumper around the rear corner radar is covered by objects such as a bumper sticker, bumper guard, bicycle rack, etc.
• The bumper around the rear corner radar is damaged, or the radar is out of position.
• The height of your vehicle is lowered or raised due to heavy loads, incorrect tire pressure, etc.

The Blind-Spot Collision Warning system may not operate normally, or the system may activate unexpectedly when the following objects are detected:

• A motorcycle or bicycle is detected.
• A vehicle such as a flatbed trailer is detected.
• A large vehicle such as a bus or truck is detected.
• A moving obstacle, such as a pedestrian, animal, shopping cart, or baby stroller is detected.
• A low-height vehicle, such as a sports car, is detected.

WARNING

• Driving on a curve

The Blind-Spot Collision Warning system may not operate properly when driving on a curved road. The system may not detect a vehicle in the adjacent lane.

Always pay attention to the road and driving conditions while driving.

The Blind-Spot Collision Warning system may not operate properly when driving on a curved road. The system may recognize a vehicle in an adjacent lane.

Always pay attention to the road and driving conditions while driving.

• Driving at a road merge/split point

The Blind-Spot Collision Warning system may not operate properly when driving where the road merges or splits. The system may not detect a vehicle in the next lane.

Always pay attention to the road and driving conditions while driving.

• Driving on a slope

The Blind-Spot Collision Warning system may not operate properly when driving on a slope. The system may not detect a vehicle in the adjacent lane, or it may misidentify the ground or composition.

Always pay attention to the road and driving conditions while driving.

• Driving where the road height is different

The Blind-Spot Collision Warning system may not operate properly when driving where the road height differs. The system may not detect a vehicle on a road with a different height (such as the entrance section of an underpass, grade-separated intersections, etc.).

Always pay attention to the road and driving conditions while driving.

WARNING

• When towing a trailer or another vehicle, make sure to turn off the Blind-Spot Collision Warning system.
• The Blind-Spot Collision Warning system may not operate normally in the presence of strong electromagnetic interference.
• The Blind-Spot Collision Warning system may not operate for 15 seconds after the vehicle is started or the rear corner radar is initialized.