Body (Interior and Exterior)
Crash Pad Under Cover Repair Procedures
In this manual: Body (Interior and Exterior)
8steps
~48min
2/5difficulty
Done 0 of 8
Replacement
[LH]
|
|
- Remove the crash pad lower panel. (Refer to Crash Pad - "Crash Pad Lower Panel")
- Loosen the mounting bolts, then remove the under cover garnish [LH] (A).

- Disconnect the lower lamp (A) and the knee airbag connector (B).

- Loosen the mounting screws, then remove the under cover garnish (A).

- Install in the reverse order of removal.

- Make sure the connector is properly connected.
- Replace any damaged clips.
|
|
- Using a flat-tip screwdriver or trim removal tool, remove the under cover [RH] (A).

- Disconnect the under lamp connector (A).

- Install in the reverse order of removal.

- Make sure the connector is properly connected.
- Replace any damaged clips.
Test yourself
A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?

