Hyundai Genesis DH Quiz
Body (Interior and Exterior)

Steering Column Cover Panel Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 103Engine Electrical System — 54Emission Control System — 23Engine Control System/Fuel System — 127Automatic Transmission System (SBC) — 90All-Wheel Drive (AWD) System — 20Drive Shaft and Axle — 27Suspension System — 41Steering — 19Restraints — 56Brake System — 56Body (Interior and Exterior) — 211Body Electrical System — 279Heating, Ventilation, and Air Conditioning — 55
7steps
~42min
2/5difficulty
Done 0 of 7

Replacement

[Steering Column Cover Upper Panel]
  • Wear gloves to avoid cutting your hands.
  • When removing with a flat-blade screwdriver or removal tool, wrap the tools with protective tape to prevent damage to components.
  • When removing interior trim components, use a plastic panel removal tool to avoid damaging the surface.
  • Be careful not to bend or scratch the trim and panels.
  1. Lower the steering wheel.
  2. Using a screwdriver or a puller, remove the upper cover of the steering column shroud (A).
  3. Install in the reverse order of removal.
    • Replace any damaged clips.
[Steering Column Cover Lower Panel]
  • Wear gloves to avoid cutting your hands.
  • When removing with a flat-blade screwdriver or removal tool, wrap the tools with protective tape to prevent damage to components.
  • When removing interior trim components, use a plastic panel removal tool to avoid damaging the surface.
  • Be careful not to bend or scratch the trim and panels.
  1. Remove the crash pad upper panel. (Refer to Crash Pad - "Crash Pad Lower Panel")
  2. Loosen the mounting screws by turning the steering wheel left and right, and remove the steering column cover lower panel (A).
  3. Disconnect the connector (A).
  4. Install in the reverse order of removal.
    • Make sure the connector is properly connected.
    • Replace any damaged clips.

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.