Hyundai Genesis DH Quiz
Body (Interior and Exterior)

Front Pillar Trim Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 103Engine Electrical System — 54Emission Control System — 23Engine Control System/Fuel System — 127Automatic Transmission System (SBC) — 90All-Wheel Drive (AWD) System — 20Drive Shaft and Axle — 27Suspension System — 41Steering — 19Restraints — 56Brake System — 56Body (Interior and Exterior) — 211Body Electrical System — 279Heating, Ventilation, and Air Conditioning — 55
2steps
~12min
1/5difficulty
Done 0 of 2

Replacement
  • Wear gloves to avoid cutting your hands.
  • When removing with a flat-blade screwdriver or removal tool, wrap the tools with protective tape to prevent damage to components.
  • When removing interior trim components, use a plastic panel removal tool to avoid damaging the surface.
  • Be careful not to bend or scratch the trim and panels.
  1. Remove the front pillar trim.
    1. To remove the front pillar trim, use the clip removal tool (A) shown below.
    2. Slightly lift the front pillar trim, insert a tool, and remove the clip (A) by pulling it.
      • After removing the front pillar trim, always replace the clips with new ones.
    3. Remove the front pillar trim (A).
      • Front Pillar Trim Mounting Method
      • After removing the front pillar trim, always replace the clips with new ones.
  2. Install in the reverse order of removal.
    • Replace all damaged clips.

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.