Hyundai Genesis DH Quiz
Body (Interior and Exterior)

Rear Wheel House Trim Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 103Engine Electrical System — 54Emission Control System — 23Engine Control System/Fuel System — 127Automatic Transmission System (SBC) — 90All-Wheel Drive (AWD) System — 20Drive Shaft and Axle — 27Suspension System — 41Steering — 19Restraints — 56Brake System — 56Body (Interior and Exterior) — 211Body Electrical System — 279Heating, Ventilation, and Air Conditioning — 55
7steps
~42min
2/5difficulty
Done 0 of 7

Replacement
  • Wear gloves to avoid cutting your hands.
  • When removing with a flat-blade screwdriver or removal tool, wrap the tools with protective tape to prevent damage to components.
  • When removing interior trim components, use a plastic panel removal tool to avoid damaging the surface.
  • Be careful not to bend or scratch the trim and panels.
  1. Remove the rear seat cushion assembly. (Refer to Rear Seat - "Rear Seat Assembly")
  2. Remove the rear seatback assembly. (Refer to Rear Seat - "Rear Seat Assembly")
  3. Carefully remove the rear door body side weatherstrip.
  4. Remove the rear door sill trim. (Refer to Interior Trim - "Door Scuff Trim")
  5. Remove the rear pillar garnish. (Refer to Interior Trim - "Rear Pillar Trim")
  6. After loosening the mounting bolts, remove the rear wheel house trim (A).
  7. Install in the reverse order of removal.
    • Replace any damaged clips.

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.